The official software is available for and Mac platforms. Downloads | CPPLUS
: Default login details (username and password) are typically printed on a label on the camera's box or in the user manual. Alternative Finding Methods
While many cameras have a default IP (e.g.,
The CP Plus IP Finder is a utility software designed to scan your local network and locate all connected CP Plus devices (IP Cameras, NVRs, and DVRs). It provides a centralized interface to view device status, modify network settings, and even reset passwords. cp plus camera ip finder software
If you cannot modify the settings, the default username and password are required. If you have already initialized the camera, you will need the customized password.
If your computer uses a unique IP range, click on . Enter the specific IP address range and the camera's current administrator password to authorize the scan. Step 4: View and Modify Device IPs
The is not just a utility; it is the backbone of any successful CCTV installation. Whether you are a professional system integrator managing 64 cameras on a corporate campus or a DIY homeowner trying to view your front porch on your phone, mastering this tool saves hours of frustration. The official software is available for and Mac platforms
Features a quick diagnostic window to check camera orientation, adjust audio settings, and verify the video stream before linking to a central VMS. Step-by-Step Installation and Setup
Windows Defender or third-party antivirus software frequently blocks broad-network scanning utilities. Temporarily disable your firewall or add an exception for ConfigTool.exe .
Facilitates batch firmware updates to ensure your security cameras have the latest security patches and features. It provides a centralized interface to view device
Activates multiple new cameras and sets passwords simultaneously.
A: Partially. If the camera is plugged directly into an NVR’s built-in PoE ports, the NVR often places the camera on a private, isolated subnet (e.g., 10.0.0.x ). The IP finder software may not see the camera directly unless you run it from the NVR’s own network interface. In this case, use the NVR’s monitor output to check camera IPs.
Extract the downloaded ZIP file and run the installer executable ( .exe or .pkg ).
An unpowered or disconnected camera cannot communicate over the network.
The CP Plus Camera IP Finder Software is suitable for various applications, including: