Autokent Mvci Multi Driver X64 📥

: Open Techstream, navigate to Setup > VCI Menu , and change the Select VCI drop-down menu to "XHorse - MVCI" or "Autokent PassThru" . Critical Safety Warning: Firmware Versions

Diagnostic troubleshooting, wiring diagrams, module adaptations. Step-by-Step Installation Guide

This usually means the driver isn't properly registered. Re-run the Autokent installer and ensure your COM port is set between 1 and 4. autokent mvci multi driver x64

Before attempting to install the driver, ensure you have the following:

Posted on 11 April 2026

Once installed, the driver automatically assigns a COM port (e.g., COM3, COM5) to the cable when plugged into a USB port. This is required because diagnostic software like Techstream and HDS look specifically for a COM port to establish communication with the vehicle's ECU.

Enables 64-bit OS compatibility for older 32-bit diagnostic cables. Developer: Autokent. : Open Techstream, navigate to Setup > VCI

After install, once (or run pnputil /restart ) to let the PnP manager bind the new driver.

for Ford vehicles, though results are mixed and it may only provide partial support (often lacking MS-CAN network access). Google Groups Installation & Security Notes Installation Procedure: Re-run the Autokent installer and ensure your COM