: An analog board camera (often referred to as the "Raven") that provides CVBS video output. While it uses the same 1.3MP Sony sensor, its "drivers" or software interfaces are often used through video capture cards or specialized OSD (On-Screen Display) control boards like the 60ZRC15 . Key Technical Specifications 24C1.3XUSB (USB Model) (Analog/Raven Model) 1/3" CMOS Progressive Scan Sony 1/3" 1.3MP CMOS Resolution 1280 x 1024 (SXGA) Resolution 800 TV lines (Color) CVBS (Analog) Frame Rate Up to 25fps @ VGA Frame Rate NTSC/PAL standard OS Support Windows XP, Vista, 7, 8, 10, 11; Linux OS Support Hardware-based OSD control Driver Installation & Software
Hardware Interface and Protocols A camera driver sits between the operating system (or firmware) and the camera sensor, translating high-level capture requests into low-level register operations. Typical physical interfaces include MIPI CSI-2 for high-speed image data, I2C or SPI for sensor control, and GPIO lines for reset and power-enable signals. The 24c1.3x driver must reliably initialize the sensor over I2C, configure timing and format registers, and manage the CSI data lanes to ensure correct frame delivery. Proper handling of hardware interrupts (e.g., frame start/line end) ensures synchronization between the sensor and the host.
Select the primary .inf file, click , and follow the prompts to force-install the driver package. Troubleshooting Common Errors "Camera Not Found" or Error Code 43 24c1.3x camera driver
If you’ve come across the name , you’re likely dealing with a specialized piece of imaging hardware from Videology Imaging Solutions . These are industrial-grade 1.3-megapixel CMOS cameras often found in OEM systems, kiosks, or medical devices.
This indicates that the operating system has lost communication with the device hardware. : An analog board camera (often referred to
: Common Hardware IDs associated with this driver include USB\VID_1BBD&PID_0064 . Key Functional Components The 24C1.3x driver environment typically includes:
In , right-click the problematic camera and select Properties . Navigate to the Details tab. Click the Property dropdown menu and choose Hardware Ids . You will see a string like USB\VID_XXXX&PID_YYYY . Select the primary
Plug in the camera to a dedicated USB port to allow the firmware to initialize. 🛠️ Common Troubleshooting Steps
Once you have the Hardware ID, you can search for the driver:
Right-click the installer and select .