Ericsson Mini Link Cli Commands -

set loopback [on/off] : Activates internal or external loopbacks on specific ports/channels to isolate whether a fault resides in the local equipment, the radio path, or the user network.

DCN (management network) bring‑up

: Displays a complete list of installed hardware modules, including plug-in units, serial numbers, and product numbers. ericsson mini link cli commands

copy : Used to move files, such as copying configurations or software loads to/from an FTP server.

The Ericsson MINI-LINK CLI provides a robust, scriptable, and efficient method for managing microwave links. Mastery of the commands outlined in this paper enables network engineers to perform rapid deployment, advanced troubleshooting, and fine-grained performance tuning beyond what is possible via GUI alone. set loopback [on/off] : Activates internal or external

show diagnostic : Runs built-in self-tests on the processor units and internal buses. 6. Configuration Backup and Maintenance

For deeper analysis, the CLI supports syslog and event monitoring: Mini-Link CLI | PDF - Scribd The Ericsson MINI-LINK CLI provides a robust, scriptable,

upload configuration ftp://[user]:[password]@[server_ip]/[filename.cfg] Use code with caution.

For detailed technical references, professional documentation such as the Ericsson Mini-Link 6600 CLI Descriptions

Managing the Microwave Multiplexing Unit (MMU) and the radio frequency (RF) parameters ensures link stability and optimal throughput. show radio-link Use code with caution.