Magic Pass 4300 User Manual 💫

Never plug the USB port into a computer’s data port. It is strictly for storage or power output (max 5V/1A).

| Parameter | Value | |-----------|-------| | Frequency | 13.56 MHz ± 7 kHz | | Supported cards | MIFARE Classic 1K/4K, Ultralight/NTAG, DESFire (read UID only), ISO 14443A/B | | Interface | USB 2.0 full speed (12 Mbps) | | Power | 5V DC, 100 mA max | | Read/write distance | 0–5 cm | | Operating temp | -10°C to +50°C | | Dimensions | 95 mm × 62 mm × 12 mm | | Weight | 48 g |

is designed for reliability and speed. Key features include:

Ensure the card is compatible with the reader's frequency. magic pass 4300 user manual

Which are you using to sync data?

: Instructions for scanning fingerprints three times to create a template associated with a User ID. Verification

Connect the lock positive to the NC (Normally Closed) terminal and the lock negative to GND. Never plug the USB port into a computer’s data port

: False Acceptance Rate (FAR) ≤is less than or equal to 0.0001% / False Rejection Rate (FRR) ≤is less than or equal to Power Requirements : 12V DC, 400mA

: Authorized exclusively to add, modify, or assign fingerprint templates to workers.

Supports Fingerprint (1:N), Verification (1:1), or ID + Password for added security. 📖 Quick Setup & User Guide 1. Managing User Levels Key features include: Ensure the card is compatible

High-level access to system configurations and logs.0;403;

Are you integrating this device with an or a magnetic lock ?

Unique changeable casings mean the device can match any office aesthetic. Hybrid Authentication:

: Holds permissions exclusively restricted to registering fresh biometric profiles.