Phison Mpall V3700e Exclusive Jun 2026

[PenDrive] ST.35=2 FW.35=3 [Parameter Setting] Mapping=1 Host_Control=2 PrimaryCard=1 [Configuration] Reset=1 [Test Strategy] IC Type=2251-67 ; Replace with your specific Phison controller number Optimize=Capacity Preformat=1 [Flash Parameters] Flash Vendor=TOSHIBA ; Replace with your specific NAND flash brand Flash Type=MLC [Firmware] Load=0 ; Set to 1 ONLY if you have downloaded the matching .BIN firmware files Use code with caution.

Extract the tool files. Right-click on MPALL_F1_9000_v370_0E.exe and select "Run as administrator" to give it the necessary permissions.

If your drive is completely dead, it will not appear in the tool immediately.

Click the button on the right side of the panel. Your flash drive should appear in one of the numbered grid boxes.

[OPTION] IC Type=PS2251-03 Burner File=BN03V110M.BIN Firmware Name=FW03FF01V103A.BIN Partition Boundary MB=Default Preformat=1 Erase All=1 phison mpall v3700e exclusive

If the box turns or green , the tool has successfully read your parameter file and communicates with the hardware. Click the Start button at the bottom left.

: Setting up a custom configuration file within MPALL to match the drive's parameters (Controller, Flash Type, and Host Port).

[PenDriveMP] IC Type=2251-67 Driver Letter=G USB Flash Drive=YourDriveName [Parameter Mapping] Mapping Name=Default [Config] PMode=1 Flash OS Mode=1 [Test Strategy] Do Preformat=1 [Firmware] Specify FW=1 Burner File=C:\MPALL_v3700E\BN67V120M.BIN Firmware Name=C:\MPALL_v3700E\FW67FF01M.BIN Use code with caution. Key Parameters Explained:

After successfully restoring your drive with v3700E Exclusive, immediately run chkdsk X: /f /r (replace X with your drive letter) and then use H2testw to verify the full capacity. The "Exclusive" mode can sometimes over-provision dead sectors, leading to silent data corruption months later. [PenDrive] ST

: Adjusting how the controller interfaces with the NAND memory chips to improve stability or speed.

Can revive "dead" drives that operating systems fail to recognize or format. Write-Protection Removal:

(This string identifies your specific NAND memory chip).

MPALL (Mass Production Tool) is the proprietary software used by manufacturers to flash firmware, partition drives, and set controller parameters during the production of USB sticks. Version V3700E is a specific iteration known for its compatibility with various PS2251 series controllers. If your drive is completely dead, it will

: Look for codes like PS2251-67 , PS2251-68 , PS2251-03 , or similar. Flash ID Code : Ensure it displays valid NAND architecture.

What does Windows show when you plug in the drive?

To understand v3700E, one must first understand MPALL. MPALL is the proprietary software provided by Phison to their OEM partners (manufacturers who use Phison chips in their products). It allows manufacturers to: