Once you regain access to the Admin Menu, navigate to Admin Menu > Time Tasks and either deactivate or delete the "Reboot camera" task.

If these do not work, the password has likely been changed, and a factory reset may be necessary. Troubleshooting: "MOBOTIX M10 Open Menu Fixed" Issues

The root cause of the broken menu is a compatibility mismatch between the camera's aging firmware and modern web standards.

This dork is designed to locate MOBOTIX M10 cameras that are publicly accessible and may still have the “Open Menu” button available without authentication. Unauthorised access to any network device is illegal in most jurisdictions and violates the camera owner’s rights.

: Once logged in, the Live Screen will display. Look for the dropdown menus at the top of the interface:

Once you log into the MOBOTIX M10 web interface, you may find that clicking the button results in a frozen screen, a missing sidebar, or an empty administrative panel. Fix these internal interface errors using the following methods. Disable the Java Live View Stream

If the software fixes fail, you have a deeper issue. The M10 has a known design flaw: the fails. When this battery dies, the camera loses its BIOS settings and enters a boot loop, preventing the menu from opening.

Have a unique variation of the "Open Menu Fixed" error? Share your experience in the comments below.

The Mobotix M10 is a classic, highly durable IP camera known for its dual-lens design and robust German engineering. However, because it is a legacy device that relies on older web technologies, modern web browsers often fail to load its configuration menus correctly. Users frequently find themselves locked out of the camera's settings, seeing a broken layout or a completely blank screen instead of the administration interface.

In many versions of the M10 firmware, this URL acts as a direct link to the or the Camera Configuration page, bypassing the "stuck" start page entirely.