During installation, a red Windows Security pop-up may appear warning that "Windows cannot verify the publisher of this driver software" . Click to proceed. Step 5: Verify the Installation Once the installation wizard finishes successfully: Return to the Device Manager .
A new entry will appear under the section.
For the XD, XL, and XG series, the USB driver is included within the XDPPro software package . Installing the main programming software is the standard method. Older XC series PLCs may require a different approach, potentially using a separate programming cable and CH341 serial-to-USB converter driver.
Upon reboot, a list of options will appear. Press or 7 on your keyboard to select Disable driver signature enforcement .
After a successful installation, verify that the PC recognizes the PLC correctly. Check Device Manager again. The yellow icon should be gone. xinje plc usb driver install
: Windows 7, 10, or 11 with administrative privileges. Method 1: Automatic Driver Installation via Software
: Administrative privileges on your PC to install hardware drivers. Step 1: Locate the Driver Files
user wants a long article about installing the USB driver for Xinje PLCs. I need to provide a comprehensive guide. I'll search for relevant information. search results provide some relevant pages. I need to open them to gather details for a comprehensive article. I'll open results 0, 1, 2, 3, 4, 5, and also the Spanish page for XCPPro, and the troubleshooting page. results provide detailed information on installation steps, troubleshooting, and common issues. I'll structure the article with sections for introduction, prerequisites, step-by-step installation, verification, troubleshooting, alternative methods, and conclusion.amless communication between your computer and a Programmable Logic Controller (PLC) is the backbone of any automation project. For users of Xinje PLCs, the USB port offers a convenient and fast way to download programs, monitor data, and configure devices. This comprehensive guide will walk you through every step of the Xinje PLC USB driver installation process, from preparation to troubleshooting, ensuring a smooth and successful setup.
: After the main software installation, you must often install the XNet Setup (e.g., XNetSetup_en.exe ). This package frequently contains the underlying communication drivers and virtual COM port settings needed for USB connectivity. 3. Connecting the Hardware and Driver Verification During installation, a red Windows Security pop-up may
This is the core installation process. The XDPPro installer will automatically prompt you to install the necessary USB drivers and the XINJEConfig tool.
Once installed, the yellow exclamation mark should disappear. The device will now display under as a virtual COM port (e.g., Xinje USB Serial Port (COM3) ) or under a dedicated Universal Serial Bus controllers heading. Note down the assigned COM port number. Method 3: Handling Windows Driver Signature Enforcement
Click . Windows will scan the folder, locate the driver file (often named xinje_usb.inf or similar), and install it. Click Close once the success message appears. Verifying the Connection
If the PLC does not connect, check the Device Manager to confirm the COM port number has not changed. A new entry will appear under the section
Power on the PLC and connect it to your PC via the USB or USB-to-RS232 cable. Open Device Manager: Right-click the Start button and select Device Manager Update Driver:
Choose the that matches the one identified in your Device Manager.
Your PC will reboot into a blue troubleshooting screen. Go to: .
The software installation process automatically copies the necessary driver files to your local hard drive. the downloaded zip file.
Typical path for XCP Pro : C:\Program Files (x86)\XCPPro\Driver Check the box for and click Next .