Smart — Pss Pc Nvr Setup |verified|

Setting up your Network Video Recorder (NVR) on a computer using Smart PSS allows you to monitor your security cameras, review footage, and manage system settings from anywhere. Smart PSS is the official software used for Dahua and Dahua-OEM surveillance systems.

Once you're in the PC-NVR interface, you need to turn on the module.

Download the correct version of Smart PSS for your operating system from a trusted security equipment vendor or the official manufacturer site. Run the installer and follow the on-screen prompts.

Before starting, ensure your system meets the necessary requirements to handle continuous video recording. : Windows 10/11 or macOS.

This comprehensive guide will take you through the entire process of downloading, installing, configuring, and optimizing Smart PSS on your Windows or Mac PC to connect seamlessly with your NVR. Prerequisites Before You Begin smart pss pc nvr setup

This is the fastest method if your PC and NVR share the same router or switch.

On the left-hand sidebar, you will see your NVR name listed. Click the arrow icon next to it to drop down the list of connected camera channels.

Enter the static IP address of your NVR (e.g., 192.168.1.108 ).

Ensure you have the following components ready before starting the configuration process: Setting up your Network Video Recorder (NVR) on

Before launching the Smart PSS installer, a professional must assess the environmental variables. The host PC is not a typical office workstation. For a setup supporting 16+ cameras at 4MP resolution, the requirements escalate:

Select the check boxes next to the cameras you want to record.

Go to the Smart PSS homepage and click on (Configuration). Select your local PC NVR from the device list on the left. Navigate to the Disk Manager tab. Select the drive partition you want to use for recording. Enter the amount of space (in GB) you want to allocate. Click Allocate .

Keep the NVR IP address, web port number (default is usually 37777), admin username, and password accessible. Step 1: Initialize Smart PSS and Set Master Password Launch the Smart PSS application on your PC. Download the correct version of Smart PSS for

Log in to the application using the master password you just created to access the main dashboard. Step 2: Access the Device Management Menu

Open the SmartPSS application on your PC. Look for the icon on the main toolbar. In some versions, you may need to click the "+" icon to add a new tab and then select "PC-NVR" from the dropdown menu.

After adding your NVR, look at the device list in the Devices menu. Under the column, you should see a green dot indicating the status is Online . If it shows a red dot or an offline error, double-check your NVR's network connection, IP address accuracy, and login password. Step 4: Live View Configuration and Stream Optimization

In the menu, click the Add button (usually represented by a plus icon). Fill in the required fields: