Blackweb Mechanical Gaming Keyboard Manual [extra Quality] < 95% VALIDATED >

To cycle through the pre-programmed lighting patterns (such as wave, breathing, ripple, or static), use the following shortcut: or Fn + PrtSc (Print Screen)

If the lighting is frozen or macros are not working, hold FN + ESC for 5 seconds to reset the keyboard to factory settings.

The most asked question in any Blackweb mechanical gaming keyboard manual is: "How do I change the colors?" You do not need software. Use the following cycle:

Changes the current active color scheme to a different static hue. 4. Custom Backlighting Layouts (Gaming Modes)

Use the included keycap puller tool to gently pop off the keycaps vertically. Avoid pulling at an angle to protect the switch stems. blackweb mechanical gaming keyboard manual

If your specific Blackweb model features dedicated macro keys (usually labeled ), you can program complex key sequences without software. How to Record a Macro Sequence

Safely remove the keyboard and the included keycap puller from the packaging.

Switches between 19 built-in dynamic lighting profiles (Breathing, Wave, Ripple, Static). Fn + PgUp (Page Up) Increases the LED backlighting intensity (4 levels). Adjust Brightness Down Fn + PgDn (Page Down) Decreases the LED backlighting intensity or turns LEDs off. Increase Effect Speed Fn + → (Right Arrow)

| Model Name (on box) | Switch | Backlight | Key Rollover | |---------------------|--------|-----------|--------------| | BWG-1110 | Blue | 6-color static | 19-key | | BWG-2201 | Blue | RGB breathing | Full NKRO | | BWG-TKLv2 | Red linear | Rainbow wave | 6-key + anti-ghosting | To cycle through the pre-programmed lighting patterns (such

Press Fn + Insert or Fn + Mode to cycle through the pre-programmed lighting patterns (e.g., Wave, Breathing, Ripple, Static).

Since there is no reliable software for Windows 11, you must use keyboard shortcuts to control the lighting.

The keyboard features full anti-ghosting across all keys. Every simultaneous keypress registers accurately during high-APM (Actions Per Minute) gameplay.

Press the specific macro key ( G1 , G2 , G3 , G4 , or G5 ) where you want to assign the sequence. The macro indicator LED will flash quickly. If your specific Blackweb model features dedicated macro

Are you experiencing a or looking for a specific lighting pattern ?

🔍 To identify your exact model, check the sticker on the back panel of the keyboard.

To test rollover: Open a text editor and press A, S, D, F, J, K, L, ; simultaneously. If all register, your board has true NKRO.

While the keyboard is (meaning it works instantly when plugged in), some advanced features like macros and deep RGB customization may require dedicated software. Blackweb Gaming Mechanical Keyboard - Amazon

Clean keycaps using a microfiber cloth slightly dampened with warm water and a drop of dish soap. Let all components air-dry completely for 24 hours before reattaching them. Common Troubleshooting Solutions The keyboard is completely unresponsive, and LEDs are off.