Software Dlms Ashly Protea 48 ((top)) File

: Store and recall up to 30 presets directly on the device, or save an unlimited number of configurations to your PC as backup files.

Essential for dividing frequencies between subwoofers, mid-range drivers, and high-frequency horns. The software supports Linkwitz-Riley, Bessel, and Butterworth topologies with slopes ranging from gentle 12dB/octave to steep 48dB/octave cuts.

: Delays the input signal up to 682 milliseconds. This is crucial for aligning the main PA system with delay towers or regional stage fills.

Four bands of PEQ per channel to flatten the native frequency response of individual speaker enclosures. software dlms ashly protea 48

| | Likely Cause | Solution | | -------------------------------------------------- | ----------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------- | | Device not appearing in software | Firewall blocking communication | Disable firewall temporarily; if it fixes the problem, configure the firewall to allow Ashly communications through port 3100. | | | Multiple network adapters enabled (Wi‑Fi + LAN) | Disable all secondary network connections and keep only the LAN adapter enabled. | | | Faulty Ethernet cable or no power to the device | Check that the green Link LED on the device’s Ethernet port is lit. If not, test the cable or try a direct PC connection. | | Software controls do not work | Security level set to Full Lockout (view‑only) | Change security settings in the Util menu or within the software to a lower level. | | Device appears in software but no audio passes | Muting enabled in software or routing matrix empty | Check that input channels are routed to output channels and that no mutes are engaged. | | Presets won’t save | Security level set to Preset Lock | Change security level to Off or Parameter Lock to allow saving. | | Saved settings revert after power‑cycle | Changes were not saved to a preset | After making adjustments, explicitly save them to a preset (1–30). Power‑cycling a unit without saving reverts to the last saved preset. | | Front panel does nothing, but software works | Security level set to Full Lockout on the unit itself | Access the unit’s Util menu or software to lower the security level. Factory reset if the password is forgotten. |

Once routed, each of the 8 outputs features its own processing toolkit tailored for loudspeaker management:

Route Input A exclusively to Outputs 1-4 for the Left PA, and Input B to Outputs 5-8 for the Right PA. Output Processing Blocks : Store and recall up to 30 presets

Example quick configuration: 3-way main + delay fill

To begin, you need to download the correct software from the official Ashly website. It's important to note that Ashly no longer includes a physical CD-ROM with new units.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. : Delays the input signal up to 682 milliseconds

: Check your Windows Device Manager. Look under "Ports (COM & LPT)" to see if the Ashly device or USB-to-Serial converter is recognized. If there is a yellow exclamation mark, reinstall the FTDI drivers.

Practical tips and advanced workflows

The core of the software’s flexibility is the mixing matrix. Any of the 4 inputs can be routed to any of the 8 outputs. You can mix inputs together (e.g., summing Input A and Input B to Output 1 for a mono subwoofer feed) or keep them entirely discrete for zone control. 4. The Output Section (Outputs 1 through 8)

Adjust input sensitivity to optimize headroom and match console output levels.