Leica Tc 407 Driver 📢

Connects the 5-pin Lemo port on the total station to a standard 9-pin RS232 serial port.

before plugging the cable into the PC.

These allow Windows to recognize the cable as a Virtual COM Port. GEV267/268/269 v3.00: Compatible with Windows 7, 8, and 10. GEV189/195/218 v1.70: Standard for older setups. Leica Instrument Tools:

I can provide customized troubleshooting steps to get your data transferring correctly. Share public link

Leica Total Station (or TC Series / GSI Data). LEICA TC 407 driver

For a successful connection, you should install the following: USB Cable Drivers:

For specific instructions, always consult the primary , which covers safety, setup, and operation for the entire TPS400 series. The official Leica Geosystems website remains the best source for downloading the latest Leica Geo Office Tools. For a deeper technical dive, you can find an archived version of the Manual Usuario Estacion Total Leica Tc 403 405 407 410.pdf , which contains over 20,000 words of detailed guidance. Community forums often have valuable discussions about data transfer from users, such as those experienced with the Leica TC 407.

Once installed, verify that Windows recognizes the cable and assigns it a communication port.

Last updated: October 2025. Drivers and links verified. Connects the 5-pin Lemo port on the total

A: Yes, using FTDI VCP driver for macOS, then run Windows surveying software via Parallels or Wine.

For successful communication between the TC 407 and Leica Geo Office (or any third-party software like C-GEO), the serial port parameters must match on both devices exactly, including Baud Rate, Data Bits, Parity, Stop Bits, and Port Assignment:

Many aftermarket Lemo-to-USB cables use inexpensive, highly reliable serial conversion chips. The two most common are:

Software that forces Windows to recognize the USB cable as a Virtual COM Port (VCP). GEV267/268/269 v3

If using a USB-to-RS232 adapter, ensure its driver is correctly installed—it will appear as a COM port number (e.g., COM3, COM4) in your computer's Device Manager. This COM port number must be selected in Leica Geo Office before starting the transfer.

Before plugging in the cable, download the driver corresponding to your cable model (e.g., GEV189 ).

The Leica TC 407 (part of the Leica TPS400 series) is a robust, reliable total station that has been a staple in surveying and construction for years. However, connecting this classic instrument to modern 64-bit Windows 10 or Windows 11 computers can present challenges, specifically regarding drivers and communication protocols.