如果你还没有使用过这款调试利器，不妨现在就下载一个，亲身体验它带来的高效与便捷。启动 sscom5.13.1.exe ，选择正确的串口，点击“打开”，你和硬件之间的对话就此开始。
Port already in use by another program (e.g., Arduino IDE, CuteCom, another Sscom instance). Fix: Close all other serial monitoring apps. Restart Sscom.
To begin debugging with this tool, follow these standard steps: Sscom5.13.1.exe
A: Sscom5.13.1.exe is used for serial communication, likely as part of a terminal emulator or serial monitor software.
No installation is required; just double-click the file. To begin debugging with this tool, follow these
: Use the "Send" box for commands and monitor real-time feedback in the "Receive" window. Safety and Security Note
Contains a dedicated sub-tool for converting image arrays directly into RGB code. Safety and Security Note Contains a dedicated sub-tool
Check this if you are sending raw hexadecimal bytes (e.g., AT vs 41 54 ).
This is a classic symptom of a baud rate mismatch . Ensure the baud rate selected in SSCOM (e.g., 115200) matches the baud rate configured on your serial device. Other issues could include incorrect data bits, stop bits, or parity settings.
Serial Debug Assistant - Free download and install on Windows