: Set to match the port you plugged into (choose USB 2.0 for safety).
is a specialized "Mass Production" (MP) software tool designed for repairing and managing USB flash drives powered by the Phison PS2251 series chip controllers. Often distributed as a "flashboot repack," this utility is essential for technical users looking to recover drives suffering from critical firmware corruption, write-protection, or capacity errors. Purpose and Supported Hardware
When a USB flash drive based on a Phison controller becomes unreadable, shows the wrong capacity, or cannot be formatted, it is often considered dead. However, the tool, often sourced from FlashBoot.ru , offers a powerful solution to "repack" (reprogram/reflash) the controller firmware and restore functionality.
: Allows for creating hidden partitions or converting a portion of the drive into a CD-ROM (ISO) emulator. Super User How to Use the Utility Identify Your Controller : Before using MPALL, use a tool like ChipGenius to confirm your drive has a Phison PS2251-XX controller Select the Right Files Burner File (BNxx.bin) : Used to prepare the controller for firmware writing. Firmware File (FWxx.bin) phison mpall v3720b ps2251 flashboot repack
This happens when the Phison controller is too corrupted to communicate with Windows normally. You may need to manually switch the drive into (Short-Circuiting). This involves opening the physical casing of the USB and using a needle to short two specific pins on the controller chip while plugging it into the PC, forcing it into a hardware-level safe mode. 2. "Flash Hang" or "0x6007" Error
: The drive is too corrupted to hand over identity protocols, or you are using a USB 3.0 port.
Verify that the detected controller information matches your ChipEasy report. Click the button located at the top or bottom of the interface to begin the low-level formatting and firmware flashing process. Troubleshooting Common Errors Error Code / Symptom Primary Cause Recommended Resolution 0x1107 / CT-ISP Fail Incorrect Burner or Firmware file selection. : Set to match the port you plugged into (choose USB 2
Feedback welcome.
In the section, select your specific NAND flash type if it doesn't auto-detect.
Double-check the flash chip generation using GetFlashInfo and update the paths in MP.ini . Purpose and Supported Hardware When a USB flash
If MPALL refuses to see your drive, your USB device might be in a "hard bricked" loop. You may need to manually switch the drive into . This involves opening the plastic casing of the USB drive and using a sewing needle to short-circuit the data pins (usually pins 29 and 30) on the NAND flash chip while plugging it into the computer. This forces the controller to boot into a safe, generic state recognizable by MPALL. 2. IDBLK Wrong Version
The is an essential utility for restoring malfunctioning USB drives. While it requires technical knowledge of finding the right firmware, it is often the only way to revive a bricked Phison-based device.
Standard factory tools are often missing critical configuration files or specific firmware binaries. The "FlashBoot Repack" is a community-assembled package that bundles the core MPAll V3.72.0B executable with an expanded library of burner targets ( BN*.BIN ) and firmware files ( FW*.BIN ) required to service a wider range of PS2251 memory chips. Prerequisites Before Flashing
The is a specialized, "repacked" mass production tool designed to flash new firmware, low-level format, and restore functionality to these drives. What is Phison MPALL v3.72.0B?