Safety and disposal
A small, recessed button used to erase all settings.
Getting started
15A Resitive, 15A General Purpose, 1250W Tungsten, 1/2HP chevron digital timer ew-32 user manual
Repeat steps 1–6 for additional programs ( 2 ON / 2 OFF , 3 ON / 3 OFF , etc.).
Sets the day(s) of the week for the clock and programs. HOUR & MIN Buttons: Adjusts the hours and minutes.
Before you begin programming, ensure the internal battery is charged to save your settings during power outages. Safety and disposal A small, recessed button used
: Press SET to cycle through hour, minute, and day. Wait 5 seconds or press CLOCK to save and exit.
My connected device does not turn on at the programmed time.
| Error | Meaning | Solution | |-------|---------|----------| | | No power or dead battery | Plug timer into a live wall outlet. Replace CR2032 battery. | | Flashing 12:00 | Power interruption | Reset the clock (see Section 3). Your programs may still be saved. | | Device turns on/off at wrong time | AM/PM confusion | Check if 6:00 is AM vs PM. Also check the day program (Mo vs Tu). | | Timer clicks but no power | Overload protection or tripped | Unplug all devices. Reset by unplugging timer for 10 minutes. | | Can't set minute to 00 | Normal function | Press – when at 01 to roll back to 00 . | HOUR & MIN Buttons: Adjusts the hours and minutes
to set the hour, minute, and day(s) for the device to turn on. Press to confirm. Set 'OFF' Time to set the desired time for the device to turn off. Press to confirm. : Repeat for other programs or return to the main screen. Operating Modes ON/AUTO/OFF button to toggle through the following modes: : Manually turns the connected device on immediately. : Runs the device according to your programmed schedules. : Manually turns the connected device off immediately. Additional Functions Countdown Timer : Press the button to enter countdown mode. Use to set the duration and press the button to start. or troubleshooting a display issue Chevron Digital Timer Ew 32 Zip - Facebook
If you shift the mode from ON to AUTO, the timer will remain ON until the next programmed OFF event occurs. If you shift from OFF to AUTO, the timer stays OFF until the next programmed ON event triggers. 6. Utilizing the Random Security Feature
If you are using the timer for the first time or haven't used it in months, the internal battery may be discharged. Step 1: Charge the Battery