Fagor Fi80 Dishwasher Manual Jun 2026

The machine features a safety microswitch. If the hood is not fully closed, it will not operate. Dishwasher Fails to Heat Up

Note: dH = German hardness degrees. Contact your local water supplier for your area’s dH rating.

Daily cleaning of the stainless steel filter trays and suction filters is required to prevent pump clogs. fagor fi80 dishwasher manual

Disclaimer: This guide serves as an educational overview. Always defer to the physical printed Fagor FI-80 manual that shipped with your specific unit or consult a certified commercial kitchen appliance technician for direct servicing and electrical repairs.

The dishwasher is controlled via a **mechanical timer (programmer)****9†L6-L10】 and a , which selects different wash/rinse programs (e.g., short wash, intensive wash, final rinse). The timer, adjustable from 0 to 240 seconds, controls pump operation and water drainage. A magnetic micro safety switch automatically stops operation when the hood is lifted. The machine features a safety microswitch

Drain and rinse the machine completely before returning it to service. 5. Troubleshooting Common Issues

Connect the unit to a hot water line delivering 120°F to 140°F (49°C to 60°C). Contact your local water supplier for your area’s

Visit fagor.com and navigate to the "Support" or "Downloads" section. Enter "FI80" into the model search. While older models may not be listed, CNA Group has been gradually re-uploading legacy documentation.