1RU or 2RU rack-mountable chassis (depending on specific sub-variant configuration).
-48 VDC nominal operational voltage (acceptable range: -38 VDC to -58 VDC).
system. As she tightened the final 5 mm bolt and connected the SFP modules , she knew that even if the temperature dropped to in the winter or hit in a summer heatwave, the 2460’s passive cooling ericsson ers 2460 datasheet
The ERS 2460 is not a chassis-based core switch. Instead, it is a designed for:
Wrap all RF jumper connections with self-amalgamating tape or use Ericsson-approved slide-on weather boots to eliminate water ingress. 1RU or 2RU rack-mountable chassis (depending on specific
When searching, use the exact model name or "Ericsson Radio 2460" . Datasheets for this equipment are often listed under umbrella terms like "Ericsson Radio System" or "Triple-Band Low-Band RRU".
As mobile network operators (MNOs) face exponential growth in data traffic, upgrading legacy infrastructure without increasing site footprint is a critical challenge. The Ericsson ERS 2460 addresses this by packing multi-band, multi-carrier support into a highly integrated system. Key Target Applications As she tightened the final 5 mm bolt
| Parameter | Value | |-----------|-------| | Operating temp (baseplate) | –40°C to +100°C | | Storage temp | –55°C to +125°C | | Cooling | Conduction / forced air (100 LFM min above 80°C baseplate) | | Dimensions (L×W×H) | 58.4 × 36.8 × 12.7 mm (2.3 × 1.45 × 0.5 in) | | Weight | ~45 g | | Form factor | Industrial half-brick (open frame) |