Challenger Ch 1000: Owner Installation Manual

Install the heavy-duty floor plate track between the bases of the two columns, securing the path for the cables and hydraulic lines. Step 4: Anchoring the Columns

Used to connect the PVC intake line to the power unit while dampening vibrations.

Press and hold the Lock button for 4 seconds to trigger a continuous siren blast and flashing lights during an emergency. 7. Troubleshooting and Diagnostic Codes

If you have a (chip) or a standard metal key. Challenger Ch 1000 Owner Installation Manual

Before the first vehicle is ever lifted, the manual prescribes a series of load tests and safety lock checks

Chassis Ground. This is the most common cause of system failure. Connect to a solid metal part of the vehicle frame using a ring terminal. 🛰️ Secondary Input/Output Harness

What or diagnostic lights are you seeing? Install the heavy-duty floor plate track between the

Locate the red and black battery leads included with the panel accessories.

To meet modern safety standards, anti-entrapment devices must be wired and functional:

Select a permanent location for the power unit that balances accessibility and noise control. Ideal locations include garages, basements, utility closets, or laundry rooms. This is the most common cause of system failure

Use a digital multimeter to test every wire before making a connection. Never rely solely on color charts, as manufacturers often change wire colors mid-year. 🔌 Primary Wiring Harness (6-Pin Main Connector)

Play a clean, uncompressed audio track or test tone. Turn the volume on your radio up to about 75% to 80% of its maximum capacity.

Connect the wires to the dedicated on the bottom left of the main board. This connection is non-polarized.

Regular maintenance ensures the safety reversal system works correctly to prevent injury. Troubleshooting Common Issues

. Because the CH 1000 is designed to hoist thousands of pounds, the structural integrity of the concrete floor is paramount. The manual specifies the required PSI (pounds per square inch)