Scroll through the list of maintenance options, select Waste ink pad counter , and click OK .
By following this guide, you can successfully bypass the service life error on your Epson 1410 and extend the lifespan of your A3 photo printer without paying for expensive service center repairs.
: Open AdjProg.exe , click Select , and choose the Stylus Photo 1410 model and the corresponding port. reset eprom epson 1410 adjustment program top
This means the software cannot see the printer. Check your USB connection, make sure the printer is turned on, and close any other software (like the official Epson Status Monitor) that might be hogging the communication port.
Restart both your computer and the printer. Ensure the printer driver is fully installed and recognized by Windows Device Manager. Scroll through the list of maintenance options, select
: This is the definitive "paper" for the device, providing detailed internal diagrams and procedures for electronic adjustments.
A pop-up prompt will instruct you to turn off the printer. Turn off the printer using its physical power button, click OK on the software prompt, wait 10 seconds, and turn the printer back on. This means the software cannot see the printer
That memory was the trap.
printer has suddenly stopped working, displaying flashing lights, and showing an error message on your computer screen that says or "Service Required" , you are facing a common issue: the Waste Ink Pad Counter has reached its maximum limit.
Click on the button on the right side of the main window. This opens the advanced service menu. Step 4: Locate the Waste Ink Pad Counter
: The main program interface will now show a menu. Look for and double-click on an option labeled " Particular adjustment mode " or something similar. This will open a new window with a list of specific technical functions you can perform.